Roof trim
Medium trapezoidal roof sheet
VANKKA Trapez T35
More section depth where the purlins are further apart.
- Code
- T35
- Fixing
- Exposed fixing
- Category
- Roofing Profiles
Profile cross-section — schematic, not to scale
Overview
T35 answers the most common question asked of T20: what if the purlins are further apart. The deeper section carries more between supports, which either removes a line of steel from the frame or lets an existing frame take a new roof without additional purlins.
The profile is otherwise conventional — exposed fixings through the flat, standard side lap, cut to the length of the run — so nothing about the installation method changes when a project steps up from T20.
Where the span is longer still, or the roof has to act structurally, move to T45 or T130 rather than pushing this profile past its load-span table.
Applications
- Commercial roofs
- Agricultural and equestrian buildings
- Storage and logistics
- Roofs over widely spaced purlins
01
Longer clear spans
Additional section depth extends the distance between purlins compared with a shallow profile.
02
Same installation method
Fixing, lapping and trim details match T20 — no retraining between profiles.
03
Frame savings
A deeper sheet can remove purlin lines from the secondary steelwork entirely.
Technical data
Specifications
All VANKKA data is metric. Values are confirmed for your project at quotation and issued with the technical documentation.
Verified technical data for this product is being finalised. The data sheet structure below shows exactly what will be published — request the full technical documentation and our team will send the current figures for your project.
Geometry
Material
Coating
Performance
Warranty & compliance
Finishes
Coating systems and colours
Coating choice is driven by exposure and expected service life rather than by colour. Both are confirmed with your quotation.
Standard Polyester
SPThe volume coating. Proven, economical, widely specified.
Matt Polyester
MPLow gloss, low reflection, contemporary.
Plastisol
PVC(P)Thick film, high mechanical resistance.
Colours available in these coating systems
Pure White
RAL 9010
Grey White
RAL 9002
Light Grey
RAL 7035
Grey Aluminium
RAL 9007
Iron Grey
RAL 7011
Graphite Grey
RAL 7024
Anthracite Grey
RAL 7016
Jet Black
RAL 9005
Light Ivory
RAL 1015
Clay Brown
RAL 8003
Copper Brown
RAL 8004
Chocolate Brown
RAL 8017
Oxide Red
RAL 3009
Brown Red
RAL 3011
Wine Red
RAL 3005
Moss Green
RAL 6005
Chrome Green
RAL 6020
Fir Green
RAL 6009
Gentian Blue
RAL 5010
Steel Blue
RAL 5011
Slate Blue
RAL 5008
On-screen colours are approximations. Coated steel changes appearance with gloss level, surface texture, viewing angle and daylight. Always confirm a colour against a physical VANKKA sample before ordering.
Documentation
Everything you need to specify it.
Data sheets, installation guides, CAD details, declarations of performance and warranty terms. Documents not yet published can be requested directly and will be sent by the technical team.
- RequestTechnical data sheet
Technical data sheet
Data sheetPDF
- RequestInstallation guide
Installation guide
Installation guidePDF
- RequestCAD profile and details
CAD profile and details
CAD filesDWG / DXF
- RequestDeclaration of performance
Declaration of performance
Declaration of performancePDF
- RequestWarranty terms
Warranty terms
WarrantyPDF
Gallery
VANKKA Trapez T35 in use
Photography of this product in production and on completed buildings.
VANKKA Trapez T35 on a completed building
VANKKA Trapez T35 profile detail, raking light
VANKKA Trapez T35 in production on the roll-forming line
VANKKA Trapez T35 installed — junction and trim detail
Completes the system
Trims and accessories designed for this product
Ordered with the profile, these come from the same coil and the same batch — so they match exactly.
