Facade trim
Trapezoidal wall sheet
VANKKA Trapez W18
The industrial elevation, done properly.
- Code
- W18
- Fixing
- Exposed fixing
- Category
- Wall Profiles
Profile cross-section — schematic, not to scale
Overview
W18 is the standard industrial wall sheet: trapezoidal, exposed-fixed, fast to erect over sheeting rails, and available in the same coating systems and colours as our roof profiles so a whole envelope can be specified as one material.
It runs vertically or horizontally. Vertical is faster and drains better; horizontal gives a longer, lower reading of the building and lets the sheeting rails run with the frame. Both are covered by the same trim set.
For buildings that need a warmer or quieter interior, W18 pairs with our liner tray system to form a built-up wall with insulation between the two skins.
Applications
- Industrial and warehouse walls
- Agricultural buildings
- Built-up wall systems
- Screens and enclosures
01
Matches the roof range
Same coating systems and colours as our roof profiles, for a single-material envelope.
02
Vertical or horizontal
One profile, two orientations, one trim set.
03
Built-up compatible
Pairs with liner trays and insulation to form an insulated wall on site.
Technical data
Specifications
All VANKKA data is metric. Values are confirmed for your project at quotation and issued with the technical documentation.
Verified technical data for this product is being finalised. The data sheet structure below shows exactly what will be published — request the full technical documentation and our team will send the current figures for your project.
Geometry
Material
Coating
Performance
Warranty & compliance
Finishes
Coating systems and colours
Coating choice is driven by exposure and expected service life rather than by colour. Both are confirmed with your quotation.
Standard Polyester
SPThe volume coating. Proven, economical, widely specified.
Matt Polyester
MPLow gloss, low reflection, contemporary.
Plastisol
PVC(P)Thick film, high mechanical resistance.
Colours available in these coating systems
Pure White
RAL 9010
Grey White
RAL 9002
Light Grey
RAL 7035
Grey Aluminium
RAL 9007
Iron Grey
RAL 7011
Graphite Grey
RAL 7024
Anthracite Grey
RAL 7016
Jet Black
RAL 9005
Light Ivory
RAL 1015
Clay Brown
RAL 8003
Copper Brown
RAL 8004
Chocolate Brown
RAL 8017
Oxide Red
RAL 3009
Brown Red
RAL 3011
Wine Red
RAL 3005
Moss Green
RAL 6005
Chrome Green
RAL 6020
Fir Green
RAL 6009
Gentian Blue
RAL 5010
Steel Blue
RAL 5011
Slate Blue
RAL 5008
On-screen colours are approximations. Coated steel changes appearance with gloss level, surface texture, viewing angle and daylight. Always confirm a colour against a physical VANKKA sample before ordering.
Documentation
Everything you need to specify it.
Data sheets, installation guides, CAD details, declarations of performance and warranty terms. Documents not yet published can be requested directly and will be sent by the technical team.
- RequestTechnical data sheet
Technical data sheet
Data sheetPDF
- RequestInstallation guide
Installation guide
Installation guidePDF
- RequestCAD profile and details
CAD profile and details
CAD filesDWG / DXF
- RequestDeclaration of performance
Declaration of performance
Declaration of performancePDF
- RequestWarranty terms
Warranty terms
WarrantyPDF
Gallery
VANKKA Trapez W18 in use
Photography of this product in production and on completed buildings.
VANKKA Trapez W18 on a completed building
VANKKA Trapez W18 profile detail, raking light
VANKKA Trapez W18 in production on the roll-forming line
VANKKA Trapez W18 installed — junction and trim detail
Completes the system
Trims and accessories designed for this product
Ordered with the profile, these come from the same coil and the same batch — so they match exactly.
