Facade trim
Liner tray
VANKKA Liner L100
The inner skin of a built-up wall.
- Code
- L100
- Fixing
- Exposed fixing
- Category
- Wall Profiles
Profile cross-section — schematic, not to scale
Overview
In a built-up wall the liner tray does three jobs: it forms the internal surface, it holds the insulation between its webs and — sealed correctly at every joint — it is the air barrier for the whole elevation.
That last job is the one most often lost on site. L100 is supplied with the sealing tape system and a joint detail that makes a continuous air barrier achievable by a sheeting crew rather than a specialist, which is the difference between a designed airtightness figure and a measured one.
The tray spans horizontally between columns and receives the outer sheet through spacer bars, so the two skins are thermally separated.
Applications
- Built-up industrial walls
- Insulated commercial envelopes
- Cold stores and controlled environments
- Internal linings
01
Carries the insulation
Insulation sits between the webs — no separate support system required.
02
Air barrier by design
Supplied with a sealing system a sheeting crew can actually execute continuously.
03
Thermally separated
Spacer bars break the path between inner and outer skins.
Technical data
Specifications
All VANKKA data is metric. Values are confirmed for your project at quotation and issued with the technical documentation.
Verified technical data for this product is being finalised. The data sheet structure below shows exactly what will be published — request the full technical documentation and our team will send the current figures for your project.
Geometry
Material
Coating
Performance
Warranty & compliance
Finishes
Coating systems and colours
Coating choice is driven by exposure and expected service life rather than by colour. Both are confirmed with your quotation.
Standard Polyester
SPThe volume coating. Proven, economical, widely specified.
Colours available in these coating systems
Pure White
RAL 9010
Grey White
RAL 9002
Light Grey
RAL 7035
Grey Aluminium
RAL 9007
Iron Grey
RAL 7011
Anthracite Grey
RAL 7016
Jet Black
RAL 9005
Light Ivory
RAL 1015
Clay Brown
RAL 8003
Copper Brown
RAL 8004
Chocolate Brown
RAL 8017
Oxide Red
RAL 3009
Brown Red
RAL 3011
Wine Red
RAL 3005
Moss Green
RAL 6005
Chrome Green
RAL 6020
Gentian Blue
RAL 5010
Slate Blue
RAL 5008
On-screen colours are approximations. Coated steel changes appearance with gloss level, surface texture, viewing angle and daylight. Always confirm a colour against a physical VANKKA sample before ordering.
Documentation
Everything you need to specify it.
Data sheets, installation guides, CAD details, declarations of performance and warranty terms. Documents not yet published can be requested directly and will be sent by the technical team.
- RequestTechnical data sheet
Technical data sheet
Data sheetPDF
- RequestInstallation guide
Installation guide
Installation guidePDF
- RequestCAD profile and details
CAD profile and details
CAD filesDWG / DXF
- RequestDeclaration of performance
Declaration of performance
Declaration of performancePDF
- RequestWarranty terms
Warranty terms
WarrantyPDF
Gallery
VANKKA Liner L100 in use
Photography of this product in production and on completed buildings.
VANKKA Liner L100 on a completed building
VANKKA Liner L100 profile detail, raking light
VANKKA Liner L100 in production on the roll-forming line
VANKKA Liner L100 installed — junction and trim detail
Completes the system
Trims and accessories designed for this product
Ordered with the profile, these come from the same coil and the same batch — so they match exactly.
